Stainless Steel Thru-Hull, Flush Mount Transducer, 600W (10-Pin), 20° Tilted Element
Beam Angle45 and 12 Degrees
Frequency50 and 200 kHz
Housing TypeStainless Steel
Install TypeThru Hull
Power Rating600 W
Shipping Info5 lbs, 13x13x13
Prices and Specifications Subject to Change Without Notice.
All prices shown are in USD. Prices are valid in US and Canada only.
Airmar SS565 Housing Style Transducer
If a thru-hull flush-style 600W transducer is what you need, the Tilted Element 555T-LTD/12 will accommodate a deadrise angle between 8° and 15°, while the Tilted Element 555T-LTD/20 is right for hulls with a deadrise angle of between 16° and 24°. Both of these transducers compensate for deadrise by angling the element inside the housing.
The transducer is labeled with an arrow on top of the housing that should point towards the keel, whether it is installed to port or starboard. This ensures that the tilted element within the housing is given the correct orientation.
- 600 Watts
- 50/200 kHz
- 45/12 degree Beam Angles
- Stainless Steel Thru Hull
- 30 Foot Cable with 10-Pin Connector