OverviewFeaturesAccessoriesManuals & Docs
The NavPilot 520 is a handheld control unit that allows for full operation of your autopilot from anywhere
onboard. Its clear LCD displays various navigation information to assist you in steering your boat.
Steering your boat straight the first time and every time.
Here’s the scenario. You’re setting out for your favorite destination, the sun is shining and the sky is as blue as the sea. This is the perfect time to let the NAVpilot steer you straight to your waypoint and let you enjoy the sun and the scenery. No matter if it is a stormy day or a beautiful day, the NAVpilot series is what you need to help you arrive at your destination safely.
Self-learning and adaptive software.
Here is the key to how FURUNO has revolutionized the autopilot marketplace with the NAVpilot series. From the first dock-side setup through the last voyage you made, the NAVpilot continues to learn your vessel’s steering characteristics. This allows for dynamically adjusting the boat's steering for vessel speed, trim, draft, tide and wind effects, weather, etc. These characteristics are stored in the processor’s memory where they are continuously optimized to make the NAVpilot more versatile.
Perfect for power, sail or work boats.
With a standard set of features unrivaled by any other autopilot on the market, the NAVpilot series is perfect for any vessel from sailboats through powerboats and everything in between. Features include:
- Auto Mode - one press of a button turns the steering over to the NAVpilot to free you to monitor your radar, chart plotter, etc.
- Advanced Auto Mode - utilizing automatic ground tracking control to steer the vessel;
- Nav Mode - track control system referenced on a precision cross track error when integrated with GPS navigator
- Wind Mode - allows you to control your sailboat while compensating for the effects of wind
and tide.
Fishing just got easier with the exclusive FishHunter™(For power boat only).
FishHunter is a unique feature of FURUNO’s NAVpilot series. Find a fish target with your FURUNO sonar/sounder or bird target with your Furuno radar and feed it to the NAVpilot. The NAVpilot will activate the FishHunter mode to perform orbit, spiral or figure eight maneuvers around the specified target. This feature can also be
used for Man Overboard (MOB).
Standard Features
- High Performance Handheld Autopilot System
- Revolutionary "Adaptive" technology continuously improves performance for exact and safe navigation
- Standard "Rate Gyro" PG500R compass sensor (Compass Options include Furuno SC Series Satellite Compass, Gyro, etc.)
- Four Operating Modes:
- AUTO(Fixed Heading Control)
- ADVANCED AUTO(Fixed Ground Tracking Eliminating Effects of Wind, Tides, Swells, or Fishing Operations)
- NAV(Navigation Track Control)
- AUTOWORK(Used For Trolling or Fishing Vessels That May Require Permanent Trim Compensation)
- Large 3.6" (viewable area, 160 x 80 pixels) Silver Bright, Hi-resolution graphics LCD display
- Proportional Rate Rudder Control(w/Reversing Motor Drive Units) or Solenoid Control
- Unique Fishhunter Modes - Execute ORBIT, SPIRAL, & FIG-8 modes directly or remotely from a Furuno TLL capable product
- Precision NAV mode XTE Control (.001 NM)
- Extensive "Quick-Change" user customizable navigation data display modes
- Various Audible and Visual Alarms including user programmable alarm parameters
- "One-Touch" STBY, AUTO, NAV, and DODGE selections
- Tactile rotary knob course/menu selection
- Multiple Station Capability - Mix & Match up to six Navpilot 500 (FAP5001A), 511 (FAP5011A) or 520 (FAP5021A) displays in any combination
- May be configured for various hydraulic or Mechanical Steering Systems
Basic System Specifications and Contents:
- FAP5021 Waterproof control unit with 10 meter pigtail interface/power cable, white weather cover, and standard mount hardware
- FAP5002 Universal Processor Unit/Junction Box:
- Controls Reversible Drive Units or Solenoid activated steering systems drawing up to 50 amps (25 amps continuous)
- Two software selectable/nameable NMEA0183 NAV Data input ports and two fully programmable NMEA0183 output ports; additionally, one shared RS232 NMEA0183 I/O port is included
- Extra Large Wire Compression Terminals for Power/Motor Connections and "Pluggable" wire compression connections for Navpilot sensors and I/O ports
- FAPAR4102 Waterproof Linear Rudder Reference Unit with Outboard Mounting Brackets
- FAPAR4102 is designed specifically for the Teleflex HC5345 8" Hydraulic Steering Cylinder
- FAPAR4102 features a magnetic sensing design that has no moving parts and is immune to EMI from Fuel Injected Outboards.
- FAPAR4102 installs in a protected location behind the HC5345 Cylinder making it much less susceptible to damage from outboard engine raise/lower and fishing operations
PG500R "Rate Gyro" compass sensor with LED Status Indicators and 10 Meter pigtail interface/power cable
- PG500R includes one dedicated 6-pin Furuno AD10 protocal 25mS Data Port and one dedicated 6-pin NMEA0183 (0183HS Selectable) Data Port for Heading data distribution to radar, sonar, AIS, etc...(Both Output Ports feature robust RS485 Drivers that may be paralleled to three devices each)
- PG500R includes 10 Meter 6 pin-to-6 pin AD10/NMEA0183 Heading Cable for interfacing Furuno 17/18/19xx series Radar displays
- Full Control of PG500R is performed through Navpilot Display
Notes:
-
Furuno Hydraulic Drive Units and Voltage/Sizing information are located on the Accessories page
-
Navpilot Systems may be retrofitted to any existing 12V/24V DC Reversing or Solenoid Drive Unit provided that the current limitations are observed
-
Various handheld and fixed mount remote control units are found on the Accessories page
Power Requirements
- 12 or 24 VDC
- 7 Watts - 1 control head (excluding pump)
- 36 Watts - 6 control heads (excluding pump)
Navpilot Linear Rudder Reference Unit Installation Instructions
|
Model / Part #
|
|
MSRP - USD
|
|
000-159-686
|
Combination Power and Data Cable Assembly, 2 Meters
|
$30.00
|
|
000-154-054
|
NMEA Cable, 1 x 6 Pin Connector, 5 Meters
|
$40.00
|
|
000-154-036
|
Fluxgate Cable 10 Meters, 6 Pin Pigtail
|
$65.00
|
|
000-159-681
|
Interconnect Cable Assembly, Control Unit to Processor, 10 Meters
|
$125.00
|
|
000-147-231
|
Interconnect Cable Assembly, Control Unit to Control Unit, 10 Meters
|
$150.00
|
|
000-148-507
|
Interconnect Cable Assembly, Control Unit to Processor, 15 Meters
|
$145.00
|
|
000-148-508
|
Interconnect Cable Assembly, Control Unit to Processor, 20 Meters
|
$165.00
|
|
000-149-705
|
Control Unit Cable Assembly, 20 Meters
|
$200.00
|
|
Model / Part #
|
|
MSRP - USD
|
|
PUMPHRP11-12
|
Autopilot Pump, 12 VDC, 1.1 Cubic Inches Per Second (For Ram Sizes of Up to 13 Cubic Inches in Volume)
|
$650.00
|
|
PUMPHRP11-24
|
Autopilot Pump, 24 VDC, 1.1 Cubic Inches Per Second (For Ram Sizes of Up to 13 Cubic Inches in Volume)
|
$650.00
|
|
PUMPHRP17-12
|
Autopilot Pump, 12 VDC, 1.7 Cubic Inches Per Second (For Ram Sizes of 14 Cubic Inches to 25 Cubic Inches in Volume)
|
$650.00
|
|
PUMPHRP17-24
|
1.7 CUBIC INCH P/SEC PUMP 24V
|
$650.00
|
|
PUMPHRP75-12
|
Adjustable Flow Autopilot Pump, 12 VDC, 1.6-2.9 Cubic Inches Per Second (For Ram Cylinders Between 26 Cubic Inches and 46 Cubic Inches and / or for Vessels That Need an Adjustable Flow Pump)
|
$900.00
|
|
PUMPHRP75-24
|
Adjustable Flow Autopilot Pump, 24 VDC, 1.6-2.9 Cubic Inches Per Second (For Ram Cylinders Between 26 Cubic Inches and 46 Cubic Inches and / or for Vessels That Need an Adjustable Flow Pump)
|
$900.00
|
|
PUMPLA11-12
|
Linear Actuator, 9" Ram, 12V
|
$1,800.00
|
|
PUMPLA17-12
|
Linear Actuator, 12" Ram,12V
|
$2,000.00
|
|
Model / Part #
|
|
MSRP - USD
|
|
FAP5001
|
Waterproof 4.6" LCD Display/Control Unit with 10 Meter Pigtail Interface/Power Cable, White Weather Cover and Standard Flush-Mounting Kit (Control Unit Mounting Bracket Optional)
|
$1,295.00
|
|
FAP5001A
|
Optional 4.6" LCD Display/Control Unit for Multi-Station System (Six Displays Max). Includes Installation Materials with 10 Meter Interconnect Cable
|
$1,295.00
|
|
FAP5011A
|
Optional 3.6" LCD Display/Control Unit for Multi-Station System (Six Displays Max). Includes Installation Materials with 10 Meter Interconnect Cable
|
$895.00
|
|
FAP5021
|
Hand Held Control Unit
|
$895.00
|
|
FAP5551E
|
Handheld, Dial-Type Remote Control (Follow-Up Type) with 10-Pin Connector for Connection to the FAP6800
|
$895.00
|
|
FAP5552
|
Handheld, Dial-Type Remote Control (Follow-Up Type) with Bare Wires for Connection to the Processor Junction Box
|
$895.00
|
|
FAP6011B
|
Single Din Control Unit - NavPilot Series
|
$895.00
|
|
FAP6211E
|
Handheld, Button-Type Remote Control (Non Follow-Up Type) with 10-Pin Connector for Connection to the FAP6800
|
$795.00
|
|
FAP6212
|
Handheld, Button-Type Remote Control (Non Follow-Up Type) with Bare Wires for Connection to the Processor Junction Box
|
$795.00
|
|
FAP6221E
|
Handheld, Jog-Lever Remote Control (Non Follow-Up Type) with 10-Pin Connector for Connection to the FAP6800
|
$1,295.00
|
|
FAP6222
|
Handheld, Jog-Lever Remote Control (Non Follow-Up Type) with Bare Wires for Connection to the Processor Junction Box
|
$1,295.00
|
|
FAP6231E
|
Dodge-Type Remote Control (Non Follow-Up Type) with 10-Pin Connector for Connection to the FAP6800
|
$295.00
|
|
FAP6232
|
Dodge-Type Remote Control (Non Follow-Up Type) with Bare Wires for Connection to the Processor Junction Box
|
$295.00
|
|
FAP6800
|
Remote Control Distributor Box, Three Port
|
$245.00
|
|
FAP6821
|
Remote Junction Box
|
$110.00
|
|
FAPRRU-7168
|
7168 RUD REF UNIT NAVPILOT*
|
$595.00
|
|
Model / Part #
|
|
MSRP - USD
|
|
JAS-JO1-NFU
|
Non-Follow Up Lever Controller
|
$500.00
|
|
JAS-LC1-FFU
|
Follow Up Lever Controller
|
$800.00
|
|
MAG-COM-BKT
|
Bulkhead Mounting Bracket (PG500R & PG1000)
|
$40.00
|
|
000-147-017
|
Termination Plug, FP64-01001 (Required Option if Connecting a Second Optional Display Directly to the Processor)
|
$45.00
|
|
009-000-890
|
Navpilot 520 Mounting Cradle
|
$25.00
|
|
009-004-030
|
Hanger Bracket for Dial-Type Handheld Remote Control (FAP5551E or FAP5552)
|
$75.00
|
|
009-005-790
|
Flush Mounting Bracket, Front Fastening, F-Type for Jog-Lever Handheld Remote Control (FAP6221E or FAP6222)
|
$95.00
|
|
511-RAM-MNT
|
NAVPILOT 511 ADJ DISPLAY MOUNT
|
$45.00
|
|
Model / Part #
|
|
MSRP - USD
|
|
OME-725-00Z
|
Operator's Manual, NavPilot 500
|
$17.95
|
|
OSE-725-00Z
|
Operator's Guide, NavPilot 500
|
$5.00
|
|
IME-725-00Z
|
Installation Manual, NavPilot 500
|
$17.95
|
Prices and Specifications Subject to Change Without Notice
|
|