OverviewFeaturesAccessoriesManuals & DocsTech Info
The Furuno DS50 is a Doppler Speed Log designed to meet the IMO Resolution, IEC specifications and other national regulations. Its three-beam transmission reduces the effect of pitch and roll for high accuracy and enables the measurement of port-stbd speed as well as fore-aft speed. Keel clearance information is provided to assist with shallow water navigation.
The DS50 measures and displays the ship's over-the-ground or through-the-water speed based on the Doppler effect. Speed data can be output to external equipment such as ARPAs, INS and IBS. There are three operation modes: Ground-tracking, Water-tracking and Auto. The Auto mode continuously displays ship's speed, switching between Ground-tracking and Water-tracking automatically.
The DS50 consists of a display unit, processor and transducer. The compact design of the display unit allows flexible installation on the bridge. For monitoring at remote locations, analog and digital indicators are optionally avialable.
Ultrasonic Features
- High Resolution, 440 kHz Operating Frequency
- Stable 3-Beam Transmission , at 0, 120 and 240 degrees, 060 degree down tilt
- Transducer may be replaced from the vessels exterior while ship is in the water
Measurement Features
- Fore and Aft Speed Measurement Range of -10.0 to +40.0 knots
- Port to Starboard Speed Range of -9.9 to +9.9 knots
- Total Distance Run, Log Range of 0-99999.99 NM
- Direction of Movement Arrows, Port, Starboard, Fore and Aft
- Speed Set Alarm with Contact Closure Relay Driver Output
DSL Features
- Ground Track Speed Measurements in Depths between 1 and 200 meters
- Water Track Speed Measurements at 2 to 25 meters Depth Beneath the Keel
- Shallow Water Vessel Speed Shown with a little as 1 meter of Keel Clearance
- Display Track Mode Indicator Showing Ground, Water or Automatic Tracking
- Automatic Mode Selects Water Track in Depths in Excess of 200 meters
Main Display Features
- Display Cabinet Designed for Flush or Bulkhead Mounting
- Front Panel, Adjustable Display Dimmer
- Self Test Program with Diagnostics and Error Displays
- Multiple Digital, Analog, Contact Closure and Other Output Signals
- Chose from a wide Variety of Optional Digital or Analog Remote Displays
- Complies with IMO res. A.4789(XII), IEC 1023 and other Regulations
Power Requirements
- 110/220 VAC, 60 Hz., Single Phase, Less than 300 VA
Notes
- DS50 or the DS50T are supplied less cables
- Up to 130 meters of cable may be used between the Display and Transducer
|
Model / Part #
|
|
MSRP - USD
|
|
000-120-226
|
Transducer Extension Cable Assembly, 66S1067, 10 Meters
|
$600.00
|
|
000-120-229
|
Transducer Extension Cable Assembly, 66S1067, 30 Meters
|
$1,600.00
|
|
000-146-091
|
Transducer Extension Cable Assembly, 66S1067, 100 Meters
|
$5,455.00
|
|
000-559-240
|
Bulk Multi-Purpose Cable, 250V-DPYCY-1.25 (Sold & Priced by Meter)
|
$14.00
|
|
000-560-450
|
Bulk Multi-Purpose Cable, RW4864, Special Order (Sold & Priced by Meter)
|
$15.00
|
|
CBL-362-201
|
Transudcer Bulk Cable, 66S1067 (Sold & Priced by Meter)
|
$55.00
|
|
CBL-5NO-901
|
Bulk Multi-Purpose Cable, TTYCY-16S (Sold & Priced by Meter)
|
$76.00
|
|
Model / Part #
|
|
MSRP - USD
|
|
RD20
|
Red LED Remote Display without Bracket
|
$995.00
|
|
RD50
|
8.4"CLR LCD REMOTE DISP W/O BR
|
$2,295.00
|
|
Model / Part #
|
|
MSRP - USD
|
|
DS530-20
|
Transducer with 20 Meter Cable Attached
|
$6,075.00
|
|
DS530-30
|
Transducer with 30 Meter Cable Attached
|
$6,475.00
|
|
DS530-40
|
Transducer with 40 Meter Cable Attached
|
$6,875.00
|
|
DS530-50
|
Transducer with 50 Meter Cable Attached
|
$7,275.00
|
|
Model / Part #
|
|
MSRP - USD
|
|
DS350
|
Remote Digital Display, Bulkhead Mount
|
$6,495.00
|
|
DS351
|
Remote Digital Display, Flush Mount
|
$4,930.00
|
|
DS360
|
Interconnect Cable Junction Box
|
$2,000.00
|
|
DS370
|
Output Signal Distribution Unit
|
$6,995.00
|
|
DS501
|
Remote Control for Main Display
|
$795.00
|
|
DS730
|
Trip Distance Indicator, Flush or Tabletop Mount
|
$1,895.00
|
|
DS762
|
Analog Display, -10 to 30 Knots, Bulkhead Mount
|
$3,695.00
|
|
MF22A-2
|
Dual Range, Analog Speed Display, Bulkhead Mount
|
$4,095.00
|
|
MF22L/B
|
Dimmer Control Assembly, Bulk-Head Mount
|
$975.00
|
|
MF22R-2
|
Range Selector Unit, Bulkhead Mount
|
$650.00
|
Prices and Specifications Subject to Change Without Notice
|
|